Availability: | |
---|---|
Quantity: | |
TS-1420
TAISAN
Automatic cabinet roller coating machine :
Suitable products:
suitable for furniture, wooden doors, cabinets, floors, and other flat panels and some of the modeling products for paint coating. This is a multifunction roller coating machine, this machine adopt three application rollers , all of them can combine with different material rollers. this tripe roller coater can coat with water-based paint.
working principle :
air pump suck the paint and roller coating uniformly to the flat board surface.
triple roller coater ensure the surface paint to be smooth, with good plumpness, and with no chromatic difference.High efficiency, low coat,with paint recycle system no waste. suitable for primer & finishing coat painting.
Equipment parameters | |
Working width | 0-1320MM |
Working height | 2-80MM |
Min working length | 300MM |
Operating height | 900MM |
Total power | 12.75KW |
voltage | 380V60HZ |
Machine size | 2800*2600*1700mm |
Machine weight | 1800kg |
Coating dosage | 35-50g/㎡ |
Advantage:
This machine is avalible to the base,surface paint for the furniture,cabinet,decorative boards, which different materials as wood,MDF,wood piece and so on.
It can ensure the surface of the paint to be smooth, with good plumpness, and with no chromatic difference.
High efficiency, low cost,with paint recycle system no waste. suitable for primer & finishing coat painting.
compared and instead of manual l spraying, roller coater machine is time saving, labor saving, high efficiency, good environmental protection, can save more than 50% paint;
Equipped with imported pumping air pump, paint can be recycled through the oil groove, paint 100% utilization;
The roller is made of silica gel which raw materials imported from Japan. with good solvent resistant and wear-resistant, and has good surface coating effect.
The coater roller and the electronic roller and the conveyor controlled by separate motor\reducer\frequency, with best precision and stability.
Automatic cabinet roller coating machine :
Suitable products:
suitable for furniture, wooden doors, cabinets, floors, and other flat panels and some of the modeling products for paint coating. This is a multifunction roller coating machine, this machine adopt three application rollers , all of them can combine with different material rollers. this tripe roller coater can coat with water-based paint.
working principle :
air pump suck the paint and roller coating uniformly to the flat board surface.
triple roller coater ensure the surface paint to be smooth, with good plumpness, and with no chromatic difference.High efficiency, low coat,with paint recycle system no waste. suitable for primer & finishing coat painting.
Equipment parameters | |
Working width | 0-1320MM |
Working height | 2-80MM |
Min working length | 300MM |
Operating height | 900MM |
Total power | 12.75KW |
voltage | 380V60HZ |
Machine size | 2800*2600*1700mm |
Machine weight | 1800kg |
Coating dosage | 35-50g/㎡ |
Advantage:
This machine is avalible to the base,surface paint for the furniture,cabinet,decorative boards, which different materials as wood,MDF,wood piece and so on.
It can ensure the surface of the paint to be smooth, with good plumpness, and with no chromatic difference.
High efficiency, low cost,with paint recycle system no waste. suitable for primer & finishing coat painting.
compared and instead of manual l spraying, roller coater machine is time saving, labor saving, high efficiency, good environmental protection, can save more than 50% paint;
Equipped with imported pumping air pump, paint can be recycled through the oil groove, paint 100% utilization;
The roller is made of silica gel which raw materials imported from Japan. with good solvent resistant and wear-resistant, and has good surface coating effect.
The coater roller and the electronic roller and the conveyor controlled by separate motor\reducer\frequency, with best precision and stability.