Automatic gantry loading conveyor
Machine parameters:
| Processing width | 1100-1300mm |
| Processing length | 1800-2500mm |
| Processing thickness | 5-80mm |
| Machine size | 3880×6920×5300mm |
The gantry loading and unloading system is mainly used in the automatic production line of panel furniture. Common production lines include UV lines, double-end sealing, double-end milling, double-end sawing, and row drilling. The interval, conveying and loading and unloading are similar to stacking and stacking in the loading and unloading part.
Advantage:
The use of gantry loading and unloading system in the production line greatly improves production efficiency, product quality, reduces the work intensity of workers and reduces the Qty of operators.
Additional full-line linkage device:
1.The whole line is linked by PLC central control system.
2. Online equipment can be linked on the main control panel or can be controlled independently.
3. The overall speed and height can be adjusted online.
4. If there is a fault on the equipment in the production line, the machine in front of the fault will stop (including the fault), and the products behind will continue to run.
5.Energy-saving function: the signal is sent from the photoelectric light to control the UV lamp intensity and weak light to start through the delayer.