Product Description:
This UV Primer Coating Line r is designed for the wood, like MDF, plywood, solid wood, chipboard, which with veneer or paper and finish with different colors and matte finish.
This coating machine with separate pumps which is easy to do with different colors and no need to wash.
Working principle ：
air pump circle oil and roller coating uniformly to the flat board surface Coating
advantage：
roller coater ensure the surface paint to be smooth, with good plumpness, and withb no chromatic difference. High efficiency, low cost,with paint recycle system no waste. suitable for primer & finishing coat painting.
Machine parameters
| Model | 1420# |
| working width | 0-1320MM |
| working height | 2-80MM |
| Min working length | 300MM |
| operation height | 900MM |
| total power | 12.75KW |
| voltage | 380V60HZ |
| dimension | 2100*2600*1700 |
| weight | 1800kg |
| coating weight | 20-35g/㎡ |
1.This machine is avalible to the base,surface paint for the furniture,cabinet,decorative boards, which different materials as wood,MDF,wood piece and so on.
2.It can ensure the surface of the paint to be smooth, with good plumpness, and with no chromatic difference.
3. High efficiency, low cost,with paint recycle system no waste. suitable for primer & finishing coat painting. 4.Compared and instead of manual spraying, roller coater machine is time saving, labor saving, high efficiency, good environmental protection, can save more than 50% paint;
5. Equipped with imported pumping air pump, paint can be recycled through the oil groove, paint 100% utilization; 6. The roller is made of silica gel which raw materials imported from Japan. with good solvent resistant and wear-resistant, and has good surface coating effect.
7. The coater roller and the electronic roller and the conveyor controlled by separate motor\reducer\frequency, with best precision and stability.