UV dryer (4lamps)
Four lamps UV dryer：
Suitable products：
this equipment is mainly suitable for paint instantly drying of furniture, door panels, wood plates, metal plates, glass,pvc sheets ,etc. after UV coating
Working principle：
adopt imported high mercury UV lamp,gallium lamp and reflector plate, ultraviolet instantly drying products
Coating advantage：
increased hardness of painted products surface, UV paint instantly drying ,greatly reduce the time of coating process.
UV dryer 5lamps (1420#)：
specification
Model | TS-1420# |
Working width | 1320MM |
Working height | 2-80MM |
Minimum working length | 300MM |
Transport speed | 5-20M/MIN |
Lamp power | 9.6KW*4pcs |
Ventilation fan power | 0.75KW*4pcs |
Transport motor power | 0.75KW |
Paint type | UV paint |
Power type | 380V50HZ |
Equipment advantge
1.Conveyor use stainlless steel chain with cool system. Equiped high intensity temperature meter automaticly controls the temperature of box inside .
2.Imported intelligent uv inverter bllast which can controlle the power from 10%-100%, enhanced the uv lamp life ,fast response, power conversation rate can reach more than 95%. It can automatic adjust the specification,can inspect by itself. Can provide protection over voltage,over electricity,disconenection,short out. So it can make the stability of uv lamp greatly enhanced.conveyor use the stainless steel tube,equiped with cooling system,temperature controller automatic control temperature of box inside, Adopting high frequency power switch, uv power switching system and microprocessing technology.
3.Each group lamp equiped independent ventilation system, ensure that the temperature of box inside will be not too high.It equipped with operator observation port,which can check the lamp working or not at any time. The uv lamp is instantly dried,which greatly shortens the coating process time.