Tel: +86-757-87263301     Email: ts@cntaisan.com
Home » Products » Inert Coating Machine » New Technology For The Inert Coater

PRODUCTS

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

New Technology For The Inert Coater

In this  coating process for flat board industry, UV coatings (Including topcoat Inert) are applied using the rolling process. it applies the expert skin sensing membrane or high gloss membrane to press on uv paint ,adopt the imported high mercury ultraviolet lamp and imported reflector. Using this UV radiation, the paint dries in a state of membrane pressure.
Availability:
Quantity:
  • TS-1420

  • TAISAN

New Technology For The Inert Coater


Suitable products:

    this machine is suitable for  inert coating of furniture ,large board etc.  with high gloss effect or skin feeling effect .


working principle:  

     it applies the expert membrane  to press on uv paint ,adopt the imported high mercury ultraviolet lamp and imported reflector.  Using this UV radiation, the paint dries in a state of membrane pressure.


Coating advantage:  

     increase the hardness of coating surface, UV paint instantly dried, perfect effect of high gloss or skin feel.

inert coater machine3Z1A8650修好

Machine parameters:

model

TS-1420#

Working  width

1320MM

Working height

2-80MM

Min working length

200MM

Transport speed

5-20M/MIN

Lamp power

12KW*1pcs

Ventilation fan

0.75KW*2pcs

Back transport power

1.5KW

Front transport power

0.4KW

Paint type

UV paint

voltage

380V50HZ


Products detail :


inert coating

Equipment advantage

This machine adopts imported high mercury ultraviolet  tube and imported reflection ,the tube irradiation intensity has a choice of strength .at the same time,the configuration of high strength capacitqance and transformer greatly enchances the stability of the UV tube.the front stage conveying configuration automatically centers the device ,the imported inflation shaft loads the film,and the film change is concenient and quick.the controller controls the tension of the membrane.

the fron end conveying adopts rubber roller conveying automatic cylinder center,and the rear end conveying adopts belt conveying intruction star.

     The UV lamp is equipped with an independent exhaust system to ensure that the temperature of the cabinet will not be too high.the light will not iluminate the belt downward when there is an automatic rotaion device without product,to avoid long term exposure to the belt to damage the belt.

    Thee equipment is equipped  with an operator observation window  ,which can check whether the tube is started at any time.whether the film is enough ,and the UV tube is instantly dried ,which greatly shorten s the coating process time.


Application industry:


application industry


Previous: 
Next: 
we are located in Foshan with factory area covering  over 30.000 square meters.
Contact Us
  NO.61 Area C, Leping industy area , Sanshui district, Foshan city, Guangdong province, China
  
ts@cntaisan.com
   +86-757-87263301
   +86-13726355301

Products

Automatic Spraying Machine

Quick Links