Inert 3D coating machine
Suitable products：
this machine is suitable for inert coating of furniture ,large board etc. with high gloss effect or skin feeling effect .
working principle：
it applies the expert membrane to press on uv paint ,adopt the imported high mercury ultraviolet lamp and imported reflector. Using this UV radiation, the paint dries in a state of membrane pressure.
Coating advantage：
increase the hardness of coating surface, UV paint instantly dried, perfect effect of high gloss or skin feel.
Machine parameters:
model | TS-1420# |
Working width | 1320MM |
Working height | 2-80MM |
Min working length | 200MM |
Transport speed | 5-20M/MIN |
Lamp power | 12KW*1pcs |
Ventilation fan | 0.75KW*2pcs |
Back transport power | 1.5KW |
Front transport power | 0.4KW |
Paint type | UV paint |
voltage | 380V50HZ |
Equipment advantage
This machine adopts imported high mercury ultraviolet tube and imported reflection ,the tube irradiation intensity has a choice of strength .at the same time,the configuration of high strength capacitqance and transformer greatly enchances the stability of the UV tube.the front stage conveying configuration automatically centers the device ,the imported inflation shaft loads the film,and the film change is concenient and quick.the controller controls the tension of the membrane.
the fron end conveying adopts rubber roller conveying automatic cylinder center,and the rear end conveying adopts belt conveying intruction star.
The UV lamp is equipped with an independent exhaust system to ensure that the temperature of the cabinet will not be too high.the light will not iluminate the belt downward when there is an automatic rotaion device without product,to avoid long term exposure to the belt to damage the belt.
Thee equipment is equipped with an operator observation window ,which can check whether the tube is started at any time.whether the film is enough ,and the UV tube is instantly dried ,which greatly shorten s the coating process time.